Support Portal
            Knowledge Base Eagle Eye Support Eagle Eye Cloud VMS FAQ

            Firewall Configuration for Secure Networks

            The Eagle Eye VMS and its bridge hardware is specifically designed to be highly secure and only uses outbound TCP and UDP connections to talk to the cloud.  If you restrict outbound connections on your local firewall, here is the IPv4 and port information you will need.

            Outbound Ports for the Eagle Eye Bridge

            The following TCP and UDP ports are used by the Eagle Eye Bridge.  All connections are outbound-only, meaning that the bridge connects outbound and never accepts inbound connections (so you do NOT need to set up e.g. NAT rules as a general rule).

            80/tcp        # Used to discover video termination endpoints in the cloud

            443/tcp    # Used to transfer video to the cloud  (TLS 1.2+)

            773/tcp    # Used to transfer video to the cloud (TLS 1.2+)

            8081/tcp    # Used to transfer video to the cloud

            8082/udp    # Used to transfer video metadata to the cloud

            50000-60000/tcp    # Used occasionally to provide remote troubleshooting and maintenance (Secured via SSL)

            There can be no proxies or similar application-layer filtration devices between the Eagle Eye Bridge and the Internet, and multicast must be enabled so the bridge can detect cameras (if the bridge and cameras are on the same subnet, generally this isn’t a problem).  UPNP is NOT required (the bridge won’t use it if enabled).

            For further information on the ONVIF camera discovery protocol we use, see this article on WS-Discovery.  Web Service Discovery is an OASIS industry standard and generally works without much effort on most internal networks.  You should not need to adjust your firewall to get it to work unless there is additional firewalling between your bridge and cameras

            Outbound IPs for the Eagle Eye Bridge

            Should you need to restrict the Eagle Eye Bridge to a specific set of IP addresses, the following is the list of Eagle Eye IP addresses you should allow in CIDR format:


            Outbound Ports for the Eagle Eye Web and Mobile Applications

            Independent of the bridge, the Eagle Eye Web and Mobile Applications for PCs, tablets, and phones also need to connect to the cloud to retrieve video, set settings, and so on.  The ports required for this are: 

            tcp/80            # HTTP->SSL Redirect Only

            tcp/443        # Web user interface

            tcp/50000-60000    # Secure video transfer

            The IPs are generally the same as for the bridge.


            Updated: 24 May 2019 01:59 AM
            Help us to make this article better
            2 0