Obtaining The Attach ID

Obtaining The Attach ID

Obtaining The Attach ID

2024-05-24

Version 2.0

‚Äč

Description

The Attach ID of your bridge will be located on a sticker affixed to the top of your unit. If this label is missing or a label wasn't provided, please follow the steps below to recover your Attach ID.

Using a Monitor connected to the bridge
  1. Connect an HDMI monitor and a USB keyboard to your bridge/CMVR.
  2. You should be presented with a login prompt - if not, press on your keyboard.
  3. Enter the username as admin, press the Enter key 
    1. Password will be the last 5 (or 6) of the serial number.
  4. The Attach ID is found on this screen.


Using the LCD Screen
    If your device has an LCD screen, you can find the Attach ID here by using the navigation buttons to the left of it.




    For support please email: support@een.com 

    or give us a call at: 512-473-0501

    Eagle Eye Knowledge Base

    US: +1-512-473-0501 

    EU: 31 (0) 20 26 10 461

    ASIA PACIFIC: +81-(3)-6869-5477

    #1 In Cloud Media Video Surveillance Worldwide

    Copyright Eagle Eye Networks. All rights reserved.

      • Related Articles

      • Bridge Local Configuration Utility

        Bridge Local Configuration Utility 2024-05-22 Version 2.0 Description This guide describes what options exist in the Local Configuration Utility. For detailed instructions regarding troubleshooting offline bridges (or cameras), follow the steps ...
      • Bridge Swap

        Bridge Swap 2024-05-13 Version 2.0 Description The bridge swap process allows you to replace your offline bridge with a new unit without losing your camera recordings. The process consists of three steps: Add the new bridge to the account. Click the ...
      • アタッチIDはどこで確認できますか

        アタッチIDはブリッジに同梱されたラベルに記載があります。もしラベルが無い、またはアタッチIDの記載が無い場合は、以下の手順によってアタッチIDを確認する事ができます。 ブリッジにモニター及びキーボードを接続する場合 HDMIモニターとUSBキーボードをブリッジまたはCMVRに接続します。 ログインプロンプトが表示されます。 Usernameにadminを入力し、Enterキーを押します。 ...
      • Adjusting Network Settings on an Eagle Eye Bridge

        Adjusting Network Settings on an Eagle Eye Networks Bridge 2024-05-13 Version 2.0 Description By default, all of our devices are set up for DHCP on the WAN and the CamLAN. In order to reconfigure these settings you will need to connect a keyboard and ...
      • New Installation

        New Installation 2024-05-14 Version 2.0 Description Our systems are set up as DHCP by default which makes installation a breeze. If the customer requires the system to be set up statically it is easy to make that change as well. Here is a standard ...