In the case of event-recording cameras, there will be times when it is needed to block out objects that are constantly in motion and triggering recording for a camera. For example, a tree swaying in the wind or a TV that is always turned on may trigger motion recording when these events are not notable. In order to utilize Eagle Eye's motion-capture feature fully, it may be best to mask out these motion regions.
1. First go to the camera's settings and select the Motion Tab.
2. Create a motion region by clicking the Yellow Plus.
3. Draw a box over the desired object that you wish to mask out.
In the above example, you can see that the region is shaped around the graphics.
4. Set the Sensitivity to 0.
5. Click Apply and then Save Changes.
There is also the possibility of creating alerts for when motion is detected in a certain region.
2. Next Click the bell next to the region that you want to receive alerts for and a drop-down menu will appear.
3. Click the Alert Enable box in order to enable alerts.
4. Select your configuration options including When, Re-rearm, Who, Mode, and Level. The sensitivity may need to be adjusted as well depending on environmental factors.
5. Click Apply and Save Changes.
In order for a user to receive motion alerts, alerts must be enabled in their My Profile.
Check the box next to the type of Alert you wish to receive as well as the method of delivery and Save Changes.
For support please email: support@een.com
or give us a call at: 512-473-0501
US: +1-512-473-0501
EU: 31 (0) 20 26 10 460
ASIA PACIFIC: +81-(3)-6869-5477
#1 In Cloud Media Video Surveillance Worldwide
Copyright Eagle Eye Networks. All rights reserved.