Camera Manager Firewall Guide
Camera Manager Firewall Guide
The following TCP and UDP ports are used by the Eagle Eye CameraManager. All connections are outbound-only, meaning that connections are outbound and never accept inbound connections.
You do not need to set up e.g. NAT rules as a general rule.
TCP 80 | Used to discover video termination endpoints in the cloud |
TCP 443 | Used to discover video termination endpoints in the cloud |
TCP 554 | Used for PnP1 video transmission of old PnP1 cameras |
TCP 1080 | Used for PnP1 data connection of old PnP1 cameras |
TCP 8181 | Used to transfer video to the cloud |
TCP 8282 | Used to transfer video to the cloud |
TCP 5448 | Used for transmission of motion events of old cameras |
TCP 1935 | Used for RTMP of old cameras |
TCP 25 | Used for SMTP event transmission of old PnP1 cameras |
UDP 50000-51000 | RTP port range |
Eagle Eye Camera Manager Subnets:
208.81.96.0/22 |
192.40.4.0/23 |
167.248.134.0/23 |
37.58.51.0/25 |
62.50.13.192/27 |
195.81.164.160/27 |
154.14.108.192/27 |
89.202.213.96/28 |
216.245.93.0/27 |
New Eagle Eye Camera Manager Subnets:
For support please email: support@een.com
or give us a call at: 512-473-0501
Eagle Eye Knowledge Base
US: +1-512-473-0501
EU: 31 (0) 20 26 10 460
ASIA PACIFIC: +81-(3)-6869-5477
#1 In Cloud Media Video Surveillance Worldwide
Copyright Eagle Eye Networks. All rights reserved.
Related Articles
Eagle Eye VMS Camera Direct Complete Setup and User Guide
Eagle Eye VMS Camera Direct Complete Setup and User Guide This guide describes how to add Camera Direct cameras to the Eagle Eye Cloud VMS. Introduction With Eagle Eye VMS Camera Direct, you can easily integrate your cameras with the Eagle Eye Cloud ...
Amcrest Camera Configuration Guide
Amcrest Camera Configuration Guide The guide provides detailed steps on the configuration of Amcrest cameras for use with an Eagle Eye bridge/CMVR. Step 1: VPN or log directly into the Amcrest camera. Click the button next to the camera in Available ...
Camera Manager FAQ
Camera Manager FAQ I installed a new router and my cameras are offline. Normally when you get another router, you will get another global IP. First you will have to be connected to the same network as the cameras. To find your new global IP, go to an ...
Mobotix/ MOVE Camera Configuration Guide
Mobotix/ MOVE Camera Configuration Guide To ensure your Mobotix camera integrates with the Eagle Eye System properly, the following configuration specifications need to be met. Configuration After logging in to the camera, navigate to the Admin Menu ...
DS200: Display Station Setup Guide
DS200 Setup Guide Quick notes: If you do not have the login information for the device please boot into safety mode to reset the password. To boot into this hold both shifts and reboot the unit. This will prompt you to set a password for the device ...