Amcrest Camera Configuration
Amcrest Camera Configuration
2024-05-23
Version 2.0
The guide provides detailed steps on the configuration of Amcrest cameras for use with an Eagle Eye bridge/CMVR.
1. Click the Satellite icon 
next to the camera or log in locally.
You will need the username and password for the camera.
There are many free IP finders available on the internet. Use one to find the IP of the camera you want to configure.
2. Click Setup.
3. Click Network.
4. Click Access Platform.
5. Turn Authentication On.
6. Click Save.
7. Click Event.
8. Select Abnormality.
9. Click Illegal Access.
10. Deselect Enable.
11. Click Save.
Configuration Complete
Your Amcrest camera is now configured to work with Eagle Eye.
If the camera does not stream after setting this configuration, please try to power cycle the camera and bridge. Also, check that the configuration saved properly. If the camera will still not stream, please contact Eagle Eye technical support.
For support please email: support@een.com
or give us a call at: 512-473-0501
US: +1-512-473-0501
EU: 31 (0) 20 26 10 461
ASIA PACIFIC: +81-(3)-6869-5477
#1 In Cloud Media Video Surveillance Worldwide
Copyright Eagle Eye Networks. All rights reserved.