How much power does the Eagle Eye NuboCam consume?

How much power does the Eagle Eye NuboCam consume?

Eagle Eye NuboCam's power consumption is 1.2A on average usage when the camera is powered on, connected to either 4G or Wi-Fi and is continuously checking motion.

Actual power usage depends on factors like light (day/night mode), storage location (cloud only or cloud and SD card), 4G/Wi-Fi coverage (less coverage means more power), the amount of motion the camera detects (more motion, more power) and the complexity of the image being captured (the more detail, the more power). So a garage with the lights turned on and minor movements take a lot less power than a tree with leaves (lots of detail) or a street in the night with a lot of moving objects.
    • Related Articles

    • How to Power Cycle an Eagle Eye Bridge/CMVR

      Power cycling an Eagle Eye Bridge/CMVR This article details how to power cycle an Eagle Eye Bridge/CMVR.  Eagle Eye offers several different models of Eagle Eye Bridges and CMVRs.  Each model has a power button that can be used to power down the ...
    • Which SIMcard dimensions does Eagle Eye NuboCam support?

      The Eagle Eye NuboCam supports micro (3FF) SIMcards. The SIMcard dimensions should be 15mm x 12mm x 0.76mm. Whenever your (own) micro SIMcard is differently sized, we advise you to contact your carrier for a SIMcard that matches our specifications as ...
    • How to setup my Eagle Eye NuboCam?

      To Install your Eagle Eye NuboCam on CameraManager, Please follow the steps below.  Installation over WiFi (If you want to install over 4G, please skip this section)  1. Plug your NuboCam in the power socket. Do this by plugging in the Micro USB ...
    • What is included in the Eagle Eye NuboCam box?

      The Box comes with everything you need to get started. Check the complete list here. Eagle Eye NuboCam 1.5 meter Micro USB cable Cable Plug (for using your Eagle Eye NuboCam outdoors) Quickstart Guide Screwdriver SIM card 5v USB power charger, ...
    • How do I reboot/reset the Eagle Eye NuboCam?

      Follow these simple steps to reboot the Eagle Eye NuboCam: Make sure your Eagle Eye NuboCam is unplugged. Remove the bottom cap using the screwdriver. Press and hold the reset button (see illustration). Reapply the power while still holding the reset ...