To integrate a Dahua camera, you need to adjust a few settings. Please follow the steps below to configure the device so that it integrates properly with the Eagle Eye Networks system
Log in to the Dahua camera.
Click on Settings > Camera > Encode
Set the Main stream to H264 and the sub-stream to MJPEG or H264 (on newer cameras, MJPEG might not be available)
Click Apply to save settings
NOTE*: If you see the Smart Codec option in the settings, please disable it, as it can cause pixelation in the stream.
Log in to the Dahua Camera.
Click on Settings > Network Settings > Platform access > Onvif
Enable Login Verification (ONVIF)
On Dahua, ONVIF user credentials need to be the same as the login credentials
Log in to the Dahua Camera.
Click on Settings > Camera > Encode > Overlay
To disable OSD, deselect channel title, time title, and location
To enable and set privacy masking, select the Privacy masking option and set up the masks
Click Apply to save settings