ANV070 Deploying Brivo Eagle Eye Video Over Starlink Internet

ANV070 Deploying Brivo Eagle Eye Video Over Starlink Internet

Application Note: Video - ANV070 

Deploying Brivo Eagle Eye Video Over Starlink Internet

2024-10-23   Revision 1.0


Target Audience


This Application Note is intended for Brivo Eagle Eye Video installers or end users who need or are considering deploying a Brivo Eagle Eye Security Camera System in connection with a Starlink satellite internet connection.  


Introduction


Satellite internet is often the go-to solution for providing connectivity in remote areas such as off-the-grid rural locations or emerging city developments where traditional internet lines aren’t yet available. It’s also essential for industrial sites like offshore oil rigs and remote agricultural operations, where there’s no existing infrastructure for standard internet service. While satellite internet can be a viable option in these scenarios, many providers still struggle to offer the high-speed connections needed for smooth video streaming or the bandwidth required to transfer large files to cloud-based services. This can be a challenge for businesses that rely on data-heavy operations.


Background


Brivo Eagle Eye Video relies on a stable internet connection for optimal performance, and, with high-resolution video storage via cloud subscriptions, it can require significant bandwidth. As a result, many traditional satellite internet providers aren't ideal for Brivo Eagle Eye Video deployment due to their slower speeds, greater latency, and higher cost. 

However, the Starlink satellite internet service from SpaceX offers high-speed, low-latency internet with acceptable upload speeds. Internal testing has shown it to be reliable and mostly compatible with our cloud-based video management system. That said, there are important limitations to consider before proceeding with a Starlink-based installation:

  • Cloud Storage Restrictions: A Starlink connection is appropriate only if your Brivo Eagle Eye Video site does not need to send high-resolution video to the cloud for off-site storage. High-resolution footage should remain on-premise.

  • Bandwidth and Data Caps: Be aware of upload speed thresholds and data caps that could pose issues for sites with heavy internet traffic (more details below).

  • Recommended Setup: We advise using a Cloud Managed Video Recorder (CMVR) for local video recording and subscribing to either the M10 or PR1 plans when using Starlink. These plans offer cloud management and remote access without requiring high-resolution video backup to the cloud, making them ideal for satellite-based setups.

This approach ensures a balance between reliable service and avoiding bandwidth overload while using satellite internet as your primary connection.


Starlink Internet Service Plans and Cloud Video Uploads


As of the release of this App Note, Starlink offers two primary service plans:

  • Standard Plan: Provides unlimited high-speed internet with download speeds ranging from 25-100 Mbps and upload speeds between 5-10 Mbps.


  • Priority Plan: Includes everything in the Standard plan, plus the option to add up to 2TB of Priority data. This data tier offers higher speeds and prioritizes your network traffic over that of standard users. Priority speeds range from 40-220 Mbps for downloads and 8-25 Mbps for uploads.


Starlink’s high-speed connection offers a maximum upload speed of 25 Mbps with its Priority Plan and 10 Mbps on the Standard plan. Additionally, the Priority Plan has a data usage cap, and exceeding it can lead to steep price hikes.


To give a real-world example: an Eagle Eye Bridge setup with 10 cameras streaming video to the cloud at 1080p resolution can easily consume over 500GB of data per week. This setup also requires a consistent upload speed of at least 8 Mbps to avoid delays in video offloading. Achieving this level of performance with Starlink could cost upwards of $500 per month, assuming the satellite receiver is in an ideal location. However, it’s important to note that upload speeds on Starlink can fluctuate significantly throughout the day due to network congestion or satellite positioning, making consistent performance unpredictable. If upload speeds drop or you hit your data cap, video offloads may slow down or stall, potentially leading to video purging (when footage is deleted from the bridge before reaching the cloud).


While it might be possible to use Starlink for cloud-stored video with a limited number of cameras, there are too many variables to make this a straightforward recommendation. For more tailored guidance and help with deployment planning for satellite installations, please contact your regional Brivo Sales Engineer. They can help determine whether Starlink will meet your specific needs.


Recommended Settings


For cloud-stored video with a Starlink connection, we recommend the Cloud Stored Video Preview plan, also known as the "PR1" plan. This plan is included at no extra cost with the base "M10" subscription (which doesn’t offer cloud-stored high-resolution video), and is available exclusively for our Cloud Managed Video Recorder (CMVR) products (https://www.een.com/hardware/cmvrs/), which include high-capacity local storage. The PR1 plan allows you to back up 30 days of low-resolution preview footage in the cloud, with options to extend storage beyond 30 days if needed. 


With this setup, you can record high-resolution video locally on an Eagle Eye CMVR while ensuring 24/7 cloud backup of the location's video history in case the CMVR is stolen, damaged, or fails. The key advantage of this approach is that the preview stream typically uses only 1/10th of the bandwidth required for full-resolution video, making it more reliable over Starlink, even for smaller installations.


Alternatively, using the M10 plan with a CMVR for local storage should also perform well, allowing you to access your site through our web applications without any issues.


We also offer an additional App Note focused on cellular connections (utilizing 4G and 5G internet) with Brivo Eagle Eye Bridges and CMVRs. It provides detailed guidance on optimizing internet bandwidth settings for locations that rely on non-traditional connections. Additionally, there’s an App Note titled Understanding Impact and How to Use Bandwidth Calculations to help you assess how camera settings affect bandwidth usage.


For more information on Starlink, visit their website (starlink.com), which has extensive documentation and videos explaining installation guidelines for satellite kits. Their mobile app is also useful for scanning the sky to ensure proper placement and angling for optimal connectivity.


Appendix


Related documentation: