Application Note: Video – ANV104
Configuring the Vehicle Surveillance Package (VSP) in Brivo Eagle Eye Video - Enhanced Web Interface
2026-11-12 Revision 2.0
This Application Note is intended for Brivo Eagle Eye Video administrators who use the Vehicle Surveillance Package (VSP) and are responsible for configuring cameras and making significant application-related settings changes. Basic working knowledge of Brivo Eagle Eye Video is recommended before making any changes to configuration settings.
The Brivo Eagle Eye License Plate Recognition (LPR) system uses an AI-based model to read license plates accurately. The model (trained on a million samples) ensures high detection rates without false or repeated reads, and high accuracy in reading both standard and non-standard number plates.
Brivo Eagle Eye LPR lets any standard ONVIF camera connected to Brivo Eagle Eye Video run LPR, rather than requiring an LPR-specific camera. The LPR analytics runs on the bridge, and the LPR data is viewed at the VSP (Vehicle Surveillance Package) module of Brivo Eagle Eye Video.
Brivo Eagle Eye Video allows you to use License Plate Recognition (LPR) cameras to Log, Track, Alert, and search for vehicles captured by LPR cameras/systems within the VSP Dashboard.
VSP is integrated with Brivo Eagle Eye LPR and Hanwha XNO-6120R/XNO-6120R cameras, and more cameras are being integrated into VSP.
Brivo Eagle Eye LPR sends the vehicle-captured results to the VSP, and Brivo Eagle Eye VSP makes it simple and fast to spot and categorize vehicle activity within your cameras’ view. You can search by plate number instead of manually scrubbing through video to find specific plates. With the advanced web interface, you can augment plate-based searches with searches for vehicle type, make, or color. Unlike manual searching, Brivo Eagle Eye VSP also allows you to trigger actions based on the vehicle license plate. VSP also groups the Entry and Exit reads of a vehicle into visits and classifies vehicles as new or frequent visitors, so you can see how long vehicles stay and how often they return directly on the Events page.
VSP is a subscription added on a per-camera basis that can be enabled for cameras that already have License Plate Recognition (LPR) analytics enabled (Brivo Eagle Eye LPR or On-Camera LPR Enabled on specific model numbers).
The following items are required:
A VSP subscription (EN(i)-PA-001-X)
LPR analytics-enabled camera
One of the following LPR analytics:
Brivo Eagle Eye LPR (part number EN(i)-ANA-020-X and EN(i)-ANA-022-X)
Hanwha LPR Model: XNO-6120R/XNV-6120R with Arteco LPR Application
User permission to use VSP
Visits and Visitors Insights (optional): a Site that contains at least one Entry and one Exit LPR camera, or one Bidirectional LPR camera. See Visits and Visitors Insights for details.
The Brivo Eagle Eye Vehicle Surveillance Package (VSP) is an add-on package for Brivo Eagle Eye Video that allows users to view, monitor, and analyze vehicle data. The VSP stores license plates and other vehicle-related information from multiple locations and cameras. Users can search for a vehicle of interest using a specific plate number or by other vehicle categories such as Make, Color, Direction, and Body Type. The VSP also analyzes the plate against configured rules to raise a real-time alert when a vehicle of interest is detected on any camera.
ONVIF IP Camera: Any standard camera capable of producing high-quality images for LPR (refer to Application Note AN102 - LPR Setup and Configuration Guide).
Camera with Built-in LPR: The Camera that processes LPR data internally and sends the results to the Bridge, which then forwards them to the VSP. Currently, the Hanwha XNO-6120R camera model is supported for cameras featuring built-in LPR functionality.
Camera Direct: Camera Direct, when enabled with Brivo Eagle Eye Cloud LPR, sends LPR results to the Brivo Eagle Eye Cloud for validation (if any Rules or Vehicle Lists are configured) and displays them on the VSP.
Brivo Eagle Eye Bridge/CMVR: Devices that perform AI processing (Brivo Eagle Eye LPR) to extract license plate and vehicle information and transmit the data to the Brivo Eagle Eye Cloud.
VSP Services in the Brivo Eagle Eye Cloud:
VSP Events DB: Stores and enables searching for license plate events via VSP.
VSP Vehicle List: Stores user-created vehicle list information for use by Eagle Eye LPR for access control (via Local ID) and for rule evaluation.
VSP Rules Engine: Stores user-created rules, evaluates events generated by LPR analytics, compares them against specific license plates, and raises real-time alerts.
Automations: Stores alert information and performs alert actions, including sending push and email notifications and integrating with third-party services like Immix, Sentinel, Zapier, etc.
The VSP dashboard is located in the bottom-left menu of Brivo Eagle Eye Video. It includes a Summary of activity, the Events page, the Automations tab (with its Alerts and Rules sections), and the Vehicle list page.
The VSP Summary page provides an overview of the Vehicle Surveillance Package activity on the account, giving a high-level summary of all license plate reads and showing the most recent alerts and cameras.
The Summary section shows the number of plates detected across several time periods: the last hour, today, yesterday, the last 7 days, and the last 30 days.
Note: These fields cannot be configured.
The most recent alerts are displayed here. For a more detailed view of alerts, go to the Alerts page. Alerts are governed by rules that can be created, modified, or deleted on the Rules page.
Cameras without any license plate reading in the last hour are listed here. This helps users monitor the cameras and understand any issues with the LPR system.
The table lists the camera name, status, location, and bridge name. All these fields provide live sorting to allow users to sort and see the location, camera, or bridge of interest.
This table lists license plate reads per camera, showing statistics for each (i.e., reads from the last hour, today, yesterday, the last 7 days, and the last 30 days). Using these numbers, over- or underactive cameras can be identified in order to determine any necessary remediation.
Cameras under the same location are grouped, and a location summary is provided. Click the expand button to view the camera-level summary.
As for cameras without a location, a camera summary is provided.
The Events page is where you can find all LPR results recognized by the LPR-enabled cameras in your account.
There are many filters available on this Events page, and each filter is explained below.
Each event also includes Visits and Visitors Insights, such as visitor type, visit duration, and the vehicle’s recent activity. See Visits and Visitors Insights later in this section.
The License plate search contains several fields that help refine the search parameters.
License Plate – Use this field to search for specific license plates or those containing particular characters. It accepts any alphanumeric characters and is not case-sensitive. You can search for partial or full plates, and there is no character limit. Do not include spaces between characters.
Examples of license plate searches:
Searching for a full license plate: HYG0123
Searching for a partial license plate that contains 123: 123
Last 24 hours – This is a time range selector. You could either select specific start and end dates and times to filter results, or use predefined time periods (current day, previous day, previous week, current month, and previous month).
Sites – Specify a predefined location to search for results from any compatible camera at that location. This requires configuring the location in the camera’s settings within Brivo Eagle Eye Video. Alternatively, select “Any location” to view results from all compatible cameras. The Location feature is only available for Pro & Enterprise.
Camera – Filters LPR results based on Cameras. Choose a specific camera, or select “Any camera” to view results from all LPR-enabled cameras.
Vehicle List – Filters based on vehicles in the Vehicle list in the VSP. This way, with one click, you can filter all registered vehicles.
Types – Filter and search for vehicles by type, such as cars, buses, motorbikes, etc.
If you click on the “Filter” option on the right, that will give you more filters:
Make – Filters vehicles by Vehicle Make. Choose a vehicle manufacturer's name to find a vehicle. You can select multiple Make options simultaneously from the multi-select dropdown list.
Color – Filters vehicles by color. Choose a vehicle color to find a vehicle. You can also select multiple colors simultaneously from the multi-select dropdown list.
Direction – Filters the search by vehicle movement direction to find vehicles entering, exiting, or both.
Access Types – This filters Vehicles by Access type (Allow/Deny). This is used in
Insight Types – Filters events by the insights shown in the Insights column: Frequent visitor, Hotlist, New vehicle, Plate swap, and Unregistered vehicle. You can select several types at once, or use Select all.
Vehicle Tags – Filters events by the custom tags assigned to vehicles in a Vehicle List (for example, Delivery Van or VIP).
Reordering filters – In the Filters panel, drag the handle at the left of a filter to change the order in which the filters are listed.
After clicking Search, the table updates with the license plates that match the search parameters. Each of the displayed license plates has the following information:
Thumbnail – Shows a screenshot of the license plate as seen by the VMS. Click the thumbnail to open the History Browser to view the clip.
License Plate Crop – Displays a cropped image of the license plate.
License Plate Information – The license plate reading as predicted by the LPR application.
State Code – The state code. Only applicable for the US region.
Camera – The name of the camera capturing the license plate.
Location – The location where the license plate was captured.
Timestamp – The date and time that the clip was taken. Note that the timestamp shown here is adjusted to the Timezone value set for the user in the system. When viewing the clip in the History Browser, the camera's time zone is displayed.
Make – The vehicle make predicted by the LPR application.
Color – The vehicle color predicted by the LPR application.
Event – Shows the event image with an Entry or Exit label. The label comes from the direction configured on the camera.
Lists – The Vehicle List the plate belongs to (e.g., Employee List or Hotlist Vehicles). A dash (—) means the plate is not on any Vehicle List.
Insights – The visit and visitor information for the event, such as Unregistered Vehicle, Frequent Visitor, New Vehicle, Duration, and the number of events in the last 7 days. See Visits and Visitors Insights below.
Use the See on map icon above the table to view the results on a map, and the Download as a report icon to download the results as a report.
Visits and Visitors Insights turn individual license plate reads into a picture of how each vehicle uses your site. Instead of reading an Entry event and an Exit event separately, VSP groups them into a visit, so you can see how long a vehicle stayed. VSP also classifies vehicles as new or frequent visitors, so you can tell regular vehicles from unfamiliar ones.
Insights appear directly on the Events page. No additional configuration is needed beyond the requirements below, and no additional permission is required. If you can see the Events tab in VSP, you can see the insights. They help you answer questions such as:
How long did this vehicle stay on site?
Is this the first time this vehicle has been seen?
Does this unregistered vehicle come back regularly?
Which vehicles that are not on any Vehicle List are on site?
Sites – Visits are established between cameras assigned to the same Site. While Sites functionality is available in Pro and Enterprise editions, users with LPR cameras on a Standard edition can request to have Sites enabled for their account via Support.
LPR camera direction setting – Every LPR camera needs to have its direction designated as Entry, Exit, or Bidirectional within the LPR Analytics Settings.
Entry and Exit coverage – A Site needs at least one Entry and one Exit camera, or one Bidirectional camera. A Site with a single camera marked only Entry or only Exit does not form visits, because the other half of the visit is never read.
LPR type – Visits and Visitors Insights are supported with Brivo Eagle Eye LPR. They are not available for third-party LPR, such as Hanwha, Mobotix, etc.
VSP forms visits automatically from LPR events, using the Site and the direction of each camera:
A visit starts when a plate is read by an Entry camera and ends when the same plate is later read by an Exit camera in the same Site. An Exit read from any Exit camera in the Site closes the visit.
With a Bidirectional camera, the first read marked as Entry starts the visit and the next read marked as Exit ends it.
The visit duration is the time between the Entry read and the matching Exit read. It is shown on the Exit event.
VSP reconciles Entry and Exit plates when they match exactly or differ by a single character. If the difference is more than one character, VSP treats them as different vehicles and does not pair the events.
Until VSP reads a matching Exit, the visit stays open, and no duration appears on the Entry event.
Times are shown in the timezone of your user profile.
The Insights column lists what VSP knows about the vehicle for each event. The items that appear depend on the event and the vehicle.
Note: New Vehicle and Frequent Visitor describe unregistered vehicles. A vehicle that is on a Vehicle List already has a known identity, so it shows its list name instead of a visitor type.
Click an event, or the Last 7 Days link in the Insights column, to open the details panel on the right side of the Events page. The panel has two tabs.
Event details – Information about the selected event:
The event image, the license plate crop, and the event video, with links to View history browser and Search for plate.
Event – The timestamp (in your profile timezone) and the camera and site.
Vehicle – The color and body type predicted by the LPR application.
Related event – For an Exit event, the matching Entry event with its camera and time, the Visit duration, and the Average duration (Last 7 days) for the vehicle.
Activity – When the vehicle was Last seen.
Vehicle activity – The history of the plate, so you can judge whether a visit is typical:
Use the range selector to choose Today, This week, Last 7 days, or Last 30 days. The total number of license plate events in the range is shown at the top.
Events are listed newest first. Each Exit is shown with its matching Entry and the Visit duration between them.
Click an event thumbnail to review it.
Find long stays – Set Directions to Exit, and review the Duration shown in the Insights column.
Find unfamiliar repeat visitors – Set Insight types to Frequent visitor. Vehicles on a Vehicle List do not appear as Frequent visitors, so every result is an unregistered vehicle.
Review first-time vehicles – Set Insight types to New vehicle and Directions to Entry, and choose the time range you want to review.
Check one vehicle’s history – Search for the plate, open its details panel, and set the Vehicle activity range to Last 30 days.
Use the Download as a report icon to save the filtered results.
The table below shows how VSP handles common camera setups and event patterns.
The Rules and Alerts pages have been combined into a single Automations tab in the VSP dashboard. The Automations tab includes a Rules section and an Alerts section, so both can be managed from one place.
The Alerts tab is the default view when the Automations page is opened. It displays a real-time log of the alerts that have been triggered by VSP-configured rules.
Alerts can be filtered using the following options:
Time range (e.g., Last 24 hours) – Select a predefined or custom time range.
Sites – Filter alerts by site.
Cameras – Filter alerts by camera.
Rule names – Filter alerts by the name of the rule that triggered them.
Rule types – Filter alerts by rule type (e.g., Allowed, Denied, Watch, Hotlist).
Actions – Filter alerts by the alert action performed.
Additional filters are available by clicking Filters on the right side of the page.
Each alert entry in the table includes the following columns:
Timestamp – The date and time the alert was triggered.
Event – The event that triggered the alert.
Rule / Type – The name and type of the rule that generated the alert.
Device / Site – The camera and site where the event occurred.
Actions / Type – The alert action(s) performed and their type.
The Brivo Eagle Eye VSP Rules service allows users to configure a rule and receive an alert when a license plate event qualifies under that rule. It supports different rules, such as:
Allowed Vehicle
Denied Vehicle
Watch Vehicle
Unregistered Vehicle
Count of license plates
Hotlist Vehicle
Wrong Way
After the alert is generated, it is sent to the alert manager service, and the action is performed as configured for the Rule. Through alert manager integration, VSP supports various alert actions, including web application or email notifications, I/O triggers, and more.
Alert Types:
Target Type:
Actions:
Actions enable you to choose additional alerts beyond those provided in the VSP section.
We support various types of action alert integrations, including Notifications (Email and Push), Generic Webhook, Immix, Monitor Computer System Sentinel, and others. In this guide, we will focus on Notifications (Email and Push).
To access Rules, select VSP -> Automations -> Rules from the side menu of the Brivo Eagle Eye Video home page.
Click Menu (three-dots icon) located in the top right corner of the Rules page and select Add Rule.
Fill in the required details on the Add Rule page and click Add Rule.
To Add a License Plate to the Rules:
Fields:
Rule Name: Enter the rule name.
Priority: Choose the priority (1 for low, 10 for highest).
Notes: Optional field to enter any notes.
Status: Enable to activate this rule, or disable it if not.
Conditions:
Alert Type: Enter the alert type based on your use case.
Target Type:
Select License Plate to apply the rule to a specific license plate.
License Plate: Enter the full or partial license plate number.
Select Vehicle List to apply the rule to a list of plates.
Vehicle List: Choose the vehicle list to which you want to apply the rule.
Location: Select the locations from the drop-down menu.
Cameras: Select the cameras from the drop-down menu.
Actions: Select the action from the drop-down menu
A Vehicle List is a collection of license plates grouped under a single name for easy management. It allows users to organize vehicles and associate them with specific cameras and locations.
For LPR-based access control, you can link a Vehicle List to an Access category and schedule, enabling automated entry based on recognized license plates. This integration supports Brivo Eagle Eye Video (LPR) and Brivo Access.
A Vehicle List can also be integrated with an external database, allowing vehicle records to be automatically synchronized and managed.
The Vehicle List page is empty if no vehicle lists have been added. To add your first vehicle list, click Add Vehicle List as shown below, which will navigate you to the appropriate page.
If some vehicle lists already exist and you want to add another, click the Menu (three vertical dots) icon located in the top right corner of the Vehicle List page, and select Add Vehicle List. Refer to the screenshot below.
Once you click Add Vehicle List, you will be directed to the page shown below.
The new vehicle list appears under Vehicle List.
Vehicle list details:
List Name: Displays the name of the created vehicle list.
Vehicles: Indicates the number of vehicles added to the vehicle list.
Location: Shows the location associated with the vehicle list.
Camera: Displays the number of cameras linked to the vehicle list.
Status: Indicates the current status of the vehicle list.
To add vehicles to a Vehicle List, click the Vehicle List where you want to add vehicles.
Add Vehicle: Use this option to add individual vehicle details. This is ideal for adding a small number of vehicles to the list.
Upload List via CSV: Use this option to add a large number of vehicles at once, suitable for bulk uploads.
If the vehicle list is empty, click Add Vehicle. This sends you to the appropriate dialog.
If there are already vehicles in the list and you wish to add more, click the Menu (three vertical dots) in the top-right corner of the Vehicle List page, then select Add Vehicle. Refer to the screenshot below.
Fill in the required details and click Add Vehicle.
Details for each field on the Add Vehicle page are below.
We have a template you can fill out with vehicle details to add vehicles using a CSV file.
Go to the Menu (three vertical dots) in the top right corner of the Vehicle List page and click Upload list via CSV.
Click the Download template button to download the template.
Open the downloaded CSV file on your system, add the vehicle details, and save the file.
Note: Fields marked with “*” (Plate and Access type) are mandatory. Ensure the data in the CSV matches the format mentioned in each column.
Click Browse Files or drag and drop the file into the box.
Once the CSV is uploaded, click Next.
The CSV file will be validated, and a table of all the data will be shown.
You will be notified of any entries that do not match the required format.
Plates that already exist in the vehicle list will also be indicated.
Review the data and click Done to insert the vehicles from the CSV file into the Vehicle List.
If changes are needed, click Cancel, make the necessary changes, and re-upload the CSV file.
Once the data is successfully uploaded, you should see all the new entries in the vehicle list.
If the plates already exist or there are errors in the input, the upload process will fail for those vehicles. The results will be shown as follows:
Failed Vehicles (Red Box): These plates were ignored because they already exist in the vehicle list.
Uploaded Vehicles (Green Box): These plates were successfully added to the vehicle list.
Brivo Eagle Eye VSP Rules service allows users to configure a rule and receive an alert when a license plate event qualifies for the rule. There are different rules. Brivo Eagle Eye VSP is configured for a specific plate or a vehicle list (a group of license plates). It supports different rules, such as:
Allowed Vehicle
Denied Vehicle
Watch Vehicle
Unregistered Vehicle
Count of license plates
Hotlist Vehicle
Alerts generated are sent to the alert manager service, and configured alert actions are performed.
Click the Menu (three vertical dots) located in the top right corner of the Rules page and select Add Rule. Refer to the screenshot below.
Fill in the required details on the Add Rule page and click Add Rule. An example rule is:
Create a Rule for unregistered vehicles and link the Brivo Eagle Eye Employee Vehicle List.
If a vehicle is detected that is not on the Brivo Eagle Eye Employee Vehicle List, an alert will be triggered.
Go to the VSP -> Rules page and click the Menu (three vertical dots) icon on the right side of the Rule that you want to edit and select Edit.
Change the Target type to Vehicle List.
Select the appropriate Vehicle List that contains the license plate details based on the applied condition. An example is shown below:
Created a Vehicle List called Guest and Hotlist with vehicle license plate information.
Edited the existing rule for the Hotlist and changed the Target type from License plate to the Vehicle list (Guest and Hotlist Vehicle List) in the rule.
Note: The camera and location for a rule are limited to the cameras applicable to the vehicle list chosen.