Application Note: Video - ANV081
Application and Installation Considerations for DB14 Cameras for Brivo Eagle Eye LPR/VSP
2025-06-25 Revision 1.0
This Application Note is intended for resellers, system integrators, and security professionals looking to deploy reliable License Plate Recognition (LPR) solutions for parking enforcement, access control, fleet management, and security applications. It targets technicians who do on-site installations of Brivo Eagle Eye Camera DB14 for LPR applications in Brivo Eagle Eye Video.
This Application Note provides insights into the Eagle Eye Camera DB14, which is purpose-built for LPR applications, offering reliable imaging for great LPR reads. Proper installation of the DB14 camera is critical for reliable operation. Improper installation can result in problems such as accuracy, consistency, offline cameras, or reliability issues. This Application Note explains best practices for DB14 camera installations, as well as practices to avoid.
This Application Note is not exhaustive. Please use and adapt this information for your DB14 installations.
Accurately capturing license plates under varied lighting conditions, vehicle speeds, and environmental factors is a critical challenge for security professionals. Traditional surveillance cameras often struggle with:
Poor nighttime visibility
Blurry images at street view (vehicle speed between 10 to 30 MPH)
Glare and low-contrast plates
Complicated and costly installation
The Eagle Eye DB14 camera is designed for low/medium-speed license plate capture.
The DB14 camera has the following key features:
Optimized image capture for LPR: 4MP resolution (2592×1520) at up to 60fps
1/1.8” Sony Progressive Scan CMOS sensor for superior low-light performance
8-32mm P-Iris motorized lens for precise focus and zoom control
Advanced night vision: Gen 3 IR with Smart Illumination (up to 70m/229ft) ensures sharp, clear plate captures even in complete darkness
True WDR (Wide Dynamic Range) for handling extreme lighting contrasts
Designed for high-speed & varying conditions
Optimized for vehicle speeds up to 40MPH (60KMPH)
2D/3D digital noise reduction (DNR) to eliminate motion blur
Pre-configured for plug-and-play installation with Brivo Eagle Eye Video
Real-time AI processing for plate recognition via Brivo Eagle Eye LPR
Secure cloud-based management with automatic software updates
Built for Harsh Environments: IP66 and IK10-rated weather-resistant housing
Operates in extreme temperatures (-40°F to 140°F)
Figure 1: DB14 measurements (in mm)
The DB14 is fully optimized for LPR applications and, when combined with Brivo Eagle Eye LPR, delivers high-accuracy plate reads. The plate reads are stored, visualized, and analyzed in Brivo Eagle Eye Video, enabling you to manage these LPR installations from anywhere.
Sharp imaging for accuracy LPR reads
Real-time plate detection and logging
Automatic alerts and access control automation
Cloud-based historical search and vehicle tracking
Support for multiple cameras in high-traffic environments
The DB14 is recommended for the following applications:
Parking lots & gated communities: Automate vehicle entry/exit.
Neighborhood security: Tracking unauthorized vehicles in your neighborhood
Fleet management: Improve audits and tracking.
Retail and delivery hubs: Verify curbside pickups.
Corporate campuses and HOAs: Enhance security and access control.
When combined with Brivo Eagle Eye LPR, the DB14 eliminates the need for expensive LPR cameras with onboard processing and any additional on-site processing servers. By making installation easy and cloud-managed, this solution reduces maintenance costs without compromising on accuracy.
Positioning: Install 5-15° off-center for optimal plate capture.
Lighting: Use IR mode for night capture, and avoid direct glare sources.
Camera Settings: Configure Brivo Eagle Eye Video to automatically detect and optimize the camera for LPR mode.
Refer to the DB14 Quick Start Guide for more details on installation.
Reference images for Indoor View:
Reference Images of Outdoor View:
Install and position the DB14 camera for optimal plate view.
Connect to Brivo Eagle Eye Video.
Enable LPR mode and assign to a VSP-enabled site.
Set up AI-based plate recognition rules for alerts, logging, and automation.
For DB14 camera installation information, refer to the DB14 Camera Quick Start Guide on https://cloud.een.com/install. For additional LPR integration details, refer to AN033 Camera Installation Considerations for LPR/ANPR.
The Brivo Eagle Eye DB14 camera is a powerful, purpose-built license plate capture camera designed to enhance security, automate vehicle tracking, and integrate seamlessly with Eagle Eye LPR. With industry-leading low-light performance, smart IR, and cloud-based intelligence, the DB14 camera eliminates missed plates and manual data entry.