ANV078 Installing Axis Cameras for Use with Brivo Eagle Eye Camera Direct

ANV078 Installing Axis Cameras for Use with Brivo Eagle Eye Camera Direct

Application Note: Video - ANV078 

Installing Axis Cameras for Use With Brivo Eagle Eye Camera Direct 

2026-09-16   Revision 6.0


Target Audience


This Application Note is intended for installers and technicians who install Axis cameras and want to use the Brivo Eagle Eye Camera Direct solution on-site for Brivo Eagle Eye Video.


Introduction


Using Brivo Eagle Eye Camera Direct, you can add your supported Axis cameras to Brivo Eagle Eye Video without needing a Bridge or CMVR. Connect your camera to a network with internet access, link it to the Cloud VMS using its MAC address (S/N number) and OAK (Owner Authentication Key), and it will be ready to stream. With Camera Direct for Axis cameras, you can stream, record video, get alerts, and search AI events using Smart Video Search. 


Supported Axis Camera Models 


Note that support for Brivo Eagle Eye Camera Direct requires Axis OS 11.8 or higher. You can check camera compatibility with the Axis Product Selector or our support document for Axis Cameras.


Firewall Settings


For Brivo Eagle Eye Camera Direct 

Allow NTP (time sync) on your network. If NTP is blocked, your Camera Direct cameras will keep dropping offline.

Open these outbound TCP ports. All connections go out from the camera only — nothing connects in, so no NAT or port-forwarding rules are needed.

  • TCP 80 and 443: find the cloud video endpoints

  • TCP 8181:send video to the cloud

Whitelist these Camera Direct hostnames and IPs:

  1. dispatch1v1.eagleeyenetworks.com

  2. dispatch2v1.eagleeyenetworks.com

  3. 192.40.4.124

  4. 192.40.5.26


Also whitelist these IP ranges:


IPs


209.94.248.0/26

195.81.164.160/27

208.81.96.0/22

89.202.213.96/28

216.245.88.0/21

167.248.134.0/23

61.120.148.0/25

167.94.38.0/23

210.248.158.0/24

167.94.228.0/23

218.102.54.64/26

192.40.4.0/23

223.197.211.0/25

199.45.160.0/22

199.204.51.0/25

96.9.120.0/22

62.50.13.192/27

136.242.84.0/22



Also whitelist these domains in your firewall:

*.eagleeyenetworks.com

*.eencloud.com



For Axis Cloud 


UDP 123 

pool.ntp.org 

Connection to an NTP server.

UDP / TCP 

443

*.connect.axis.com 

Connection for managing Axis  cameras in Axis Cloud Connect and  Axis' Development Partner Cloud  System

*-st.axis.com 



Setting up an SD card on Axis Cameras


You need to set up the SD card on the Axis cameras before you can use the Edge Sync Feature. 


If the SD card is being inserted before the camera has been added to Camera Direct:

  1.  Insert the SD card.

  2.  Log in to the camera. If no account exists, create a new username and password.

  3.  Go to System →  Storage. Open Tools, select Format, and then click Use Tool to complete the process.


  1. Click Format to format the SD card.

  2. If needed, SD card encryption can be enabled. 

  3. Add the camera to Camera Direct. 


If the SD card is being inserted after the camera has already been added to Camera Direct.

  1. Insert the SD card into the camera. 

  2. Log in using the username and password from the Brivo Eagle Eye Video web application. You can access the camera either through the Tunnel or over the local network.

  3. Navigate to System → Storage, open Tools, select Format, and click Use Tool.

  4. Click Format to begin formatting the SD card.

  5. If needed, SD card encryption can be enabled. 

  6. Restart the camera so the changes are applied correctly in Brivo Eagle Eye Video.


Connecting your Account to Axis Cloud Connect


If you are connecting an Axis Camera Direct for the first time in the account, you need to connect your account to the Axis Cloud Connect account. You can create the account for free. For more information, visit Axis My Systems. 


  1. When you add an Axis Camera Direct for the first time, you will receive a message prompting you to connect your account to the Axis My Systems account. 


  1. Click Continue to navigate to Account Settings→Integration 

  1. Click on “Connect to Axis Cloud Connect” to start the integration process; this will redirect you to the Axis website 

  1. Complete the registration process and connect the account to Brivo Video. Please refer to this video for the complete process. 

  2. Once the accounts are connected via OAuth, you can see it in Admin→Account Settings→integrations 

  1. If needed, you can remove the integration from here. If you want to remove the integration, then you need to delete all your Axis cameras from your account first. 

  2. You need to complete the above steps only once per account. 


Adding an Axis Camera to Brivo Eagle Eye Video 


To add Axis Camera Direct to the Brivo Eagle Eye Video, follow the steps mentioned below:


  1. Make sure your camera is in its factory default state and has power and internet access.

  2. Log in to Brivo Eagle Eye Video. 

  3. Go to the Dashboard. Click the + icon and choose Add Camera Direct.

  4. Get the OAK (Owner Authentication Key), which you will get on paper from the camera. 

Note: If you have lost the OAK, you can retrieve it by logging in to the camera as an administrator. Go to System → Network → Get Key. Please make sure you factory reset the camera after getting the OAK.




  1. For Axis cameras, the OAK option appears in the UI. Add the MAC address and OAK for the camera.




  1. Click the ONE CLICK button on the Axis cameras (More info). The LED should blink green once. If it does not, reset the camera.  

  2. The camera automatically updates to the latest firmware, and multiple ACAPs are downloaded and installed. This process takes 10–15 minutes. The camera then connects to Axis Cloud Connect, which onboards it to Brivo Eagle Eye Video.

  3. The camera is added and initially appears offline. It comes online once the onboarding process is complete, which can take a few minutes.



Axis  Zip stream 


Can I use Axis Zip stream with low bandwidth mode? 

Yes, it is recommended to use Axis Zipstream with low bandwidth mode.


What happens if I enable Axis Zipstream? Does it reduce data usage further?

Yes, but less than you might expect, and the savings come from a different place than most people assume.

Axis describes Zipstream as lowering bandwidth and storage requirements by an average of 50 percent or more compared to standard compression, achieved through three mechanisms: dynamic ROI, which compresses uninteresting background regions harder; dynamic GOP, which sends bandwidth-intensive I-frames less frequently when there is no motion in the scene; and dynamic FPS, which reduces the bitrate when there is little or no motion.


Site type

Without Zipstream

With Zipstream (estimated)

Quiet remote site

~35 GB per month

~22 GB per month

Moderate activity

~43 GB per month

~27 GB per month

Busy site

~55 GB per month

~35 GB per month


Which Zipstream settings should I use with Camera Direct low-bandwidth mode?

Use the default Zipstream strength with fixed GOP mode, and leave dynamic FPS disabled.

Axis recommends strength 30 or higher with dynamic GOP for cameras that are connected to the cloud and record to SD cards, which describes the Camera Direct low-bandwidth architecture exactly. 

The practical recommendation is to leave Zipstream at its shipped default, verify that live preview, thumbnails, and event playback with pre-roll all behave correctly, and only then experiment with higher strength on a single test camera.




Supported Features 


  1. The camera connects to Axis Cloud Connect and the Brivo Eagle Eye Cloud, making camera management easier. 

  2. Live and Recorded, audio from the camera to the cloud.

  3. Insert an SD card, and if cameras are stolen or destroyed, all previous video is retained in the cloud. Video is constantly synced, rather than stored and retrieved only upon request.

  4. Cloud Motion detection and AI-driven functionalities like Smart Video Search and Smart Layouts, along with Brivo Access integration, should all function as expected with Camera Direct. 

  5. LPR/VSP is supported within the Enhanced Web Interface. 

  6. Use the tunnel to access the camera to configure AOA and complete any advanced setup.

  7. Axis Object Analytics is supported. For more information, please check ANV091 Enabling Axis Object Analytics (AOA) Events in Brivo Eagle Eye Video



Limitations on Axis Camera Direct 


The following are the missing features and limitations of Axis Camera Direct cameras:

  1. 2-Way Audio: Audio from Brivo Eagle Eye Video to the camera is not supported. Coming soon

  2. Speakers cannot be connected without the bridge.